"runpy" --- Locating and executing Python modules
*************************************************

**소스 코드:** Lib/runpy.py

======================================================================

"runpy" 모듈은 파이썬 모듈을 먼저 임포트 하지 않고 찾아서 실행하는 데
사용합니다. 주요 용도는 파일 시스템이 아닌 파이썬 모듈 이름 공간을 사
용하여 스크립트를 찾을 수 있는 "-m" 명령 줄 스위치를 구현하는 것입니다
.

이것은 샌드박스 모듈이 *아닙니다* - 모든 코드가 현재 프로세스에서 실행
되고, 모든 부작용(가령 다른 모듈의 캐시된 임포트)은 함수가 반환된 후에
도 그대로 유지됩니다.

또한, 실행된 코드에서 정의된 모든 함수와 클래스는 "runpy" 함수가 반환
된 후 올바르게 작동하지 않을 수 있습니다. 이러한 제한이 주어진 사용 사
례에 적합하지 않으면, 이 모듈보다 "importlib"가 더 적합한 선택일 수 있
습니다.

"runpy" 모듈은 두 가지 함수를 제공합니다:

runpy.run_module(mod_name, init_globals=None, run_name=None, alter_sys=False)

   Execute the code of the specified module and return the resulting
   module globals dictionary. The module's code is first located using
   the standard import mechanism (refer to **PEP 302** for details)
   and then executed in a fresh module namespace.

   *mod_name* 인자는 절대 모듈 이름이어야 합니다. 모듈 이름이 일반 모
   듈이 아닌 패키지를 참조하면, 해당 패키지를 임포트하고 그 패키지 내
   의 "__main__" 서브 모듈을 실행하고 결과 모듈 전역 딕셔너리를 반환합
   니다.

   The optional dictionary argument *init_globals* may be used to pre-
   populate the module's globals dictionary before the code is
   executed. The supplied dictionary will not be modified. If any of
   the special global variables below are defined in the supplied
   dictionary, those definitions are overridden by "run_module()".

   The special global variables "__name__", "__spec__", "__file__",
   "__cached__", "__loader__" and "__package__" are set in the globals
   dictionary before the module code is executed (Note that this is a
   minimal set of variables - other variables may be set implicitly as
   an interpreter implementation detail).

   "__name__"은 (이 선택적 인자가 "None"이 아니면) *run_name*으로, 명
   명된 모듈이 패키지면 "mod_name + '.__main__'"으로, 그렇지 않으면
   *mod_name* 인자로 설정됩니다.

   "__spec__" will be set appropriately for the *actually* imported
   module (that is, "__spec__.name" will always be *mod_name* or
   "mod_name + '.__main__", never *run_name*).

   "__file__", "__cached__", "__loader__" 및 "__package__"는 모듈 스펙
   에 따라 표준적으로 설정됩니다.

   인자 *alter_sys*가 제공되고 "True"로 평가되면, "sys.argv[0]"은
   "__file__" 값으로 갱신되고 "sys.modules[__name__]"은 실행 중인 모듈
   에 대한 임시 모듈 객체로 갱신됩니다. "sys.argv[0]"과
   "sys.modules[__name__]"은 함수가 반환되기 전에 원래 값으로 복원됩니
   다.

   이 "sys" 조작은 스레드-안전하지 않습니다. 다른 스레드가 부분적으로
   초기화된 모듈과 변경된 인자 목록을 볼 수 있습니다. 스레드를 사용하
   는 코드에서 이 함수를 호출할 때 "sys" 모듈을 단독으로 두는 것이 좋
   습니다.

   더 보기: 명령 줄에서 동등한 기능을 제공하는 "-m" 옵션.

   버전 3.1에서 변경: "__main__" 서브 모듈을 찾아 패키지를 실행할 수
   있는 기능 추가.

   버전 3.2에서 변경: "__cached__" 전역 변수 추가 (**PEP 3147**을 참조
   하십시오).

   버전 3.4에서 변경: **PEP 451**이 추가한 모듈 스펙 기능을 활용하도록
   갱신되었습니다. 이것은 실제 모듈 이름을 항상 "__spec__.name"으로 액
   세스할 수 있으면서, "__cached__"가 이 방법으로 실행되는 모듈에 대해
   올바르게 설정되도록 합니다.

runpy.run_path(path_name, init_globals=None, run_name=None)

   Execute the code at the named filesystem location and return the
   resulting module globals dictionary. As with a script name supplied
   to the CPython command line, the supplied path may refer to a
   Python source file, a compiled bytecode file or a valid "sys.path"
   entry containing a "__main__" module (e.g. a zipfile containing a
   top-level "__main__.py" file).

   간단한 스크립트의 경우, 지정된 코드는 단순히 새로운 모듈 이름 공간
   에서 실행됩니다. 유효한 "sys.path" 항목(보통 zip 파일이나 디렉터리)
   의 경우, 항목이 먼저 "sys.path"의 시작 부분에 추가됩니다. 그런 다음
   함수는 갱신된 경로를 사용하여 "__main__" 모듈을 찾아 실행합니다. 지
   정된 위치에 해당 모듈이 없을 때 "sys.path"의 다른 위치에 있는 기존
   "__main__" 항목을 호출하는 것을 막는 특별한 보호 장치가 없다는 점에
   유의하십시오.

   The optional dictionary argument *init_globals* may be used to pre-
   populate the module's globals dictionary before the code is
   executed. The supplied dictionary will not be modified. If any of
   the special global variables below are defined in the supplied
   dictionary, those definitions are overridden by "run_path()".

   The special global variables "__name__", "__spec__", "__file__",
   "__cached__", "__loader__" and "__package__" are set in the globals
   dictionary before the module code is executed (Note that this is a
   minimal set of variables - other variables may be set implicitly as
   an interpreter implementation detail).

   "__name__"은 (이 선택적 인자가 "None"이 아니면) *run_name*으로, 그
   렇지 않으면 "'<run_path>'"로 설정됩니다.

   If the supplied path directly references a script file (whether as
   source or as precompiled byte code), then "__file__" will be set to
   the supplied path, and "__spec__", "__cached__", "__loader__" and
   "__package__" will all be set to "None".

   If the supplied path is a reference to a valid "sys.path" entry,
   then "__spec__" will be set appropriately for the imported
   "__main__" module (that is, "__spec__.name" will always be
   "__main__"). "__file__", "__cached__", "__loader__" and
   "__package__" will be set as normal based on the module spec.

   A number of alterations are also made to the "sys" module. Firstly,
   "sys.path" may be altered as described above. "sys.argv[0]" is
   updated with the value of "path_name" and "sys.modules[__name__]"
   is updated with a temporary module object for the module being
   executed. All modifications to items in "sys" are reverted before
   the function returns.

   "run_module()"과 달리, "sys"에 대한 변경은 이 함수에서는 선택 사항
   이 아닌데, 이 조정이 "sys.path" 항목의 실행을 허용하는 데 필수적이
   기 때문입니다. 스레드-안전 제약 사항이 계속 적용되므로, 스레드를 사
   용하는 코드에서 이 함수를 사용하려면 임포트 잠금을 사용하여 직렬화
   하거나 별도의 프로세스에 위임해야 합니다.

   더 보기: 명령 줄에서의 동등한 기능에 대한 인터페이스 옵션 ("python
         path/to/script").

   버전 3.2에 추가.

   버전 3.4에서 변경: **PEP 451**이 추가한 모듈 스펙 기능을 활용하도록
   갱신되었습니다. 이것은 "__main__"이 직접 실행되는 대신 유효한
   "sys.path" 항목에서 임포트 될 때 "__cached__"가 올바르게 설정되도록
   합니다.

더 보기:

  **PEP 338** -- 모듈을 스크립트로 실행하기
     Nick Coghlan이 작성하고 구현한 PEP.

  **PEP 366** -- 메인 모듈 명시적 상대 임포트
     Nick Coghlan이 작성하고 구현한 PEP.

  **PEP 451** -- 임포트 시스템의 ModuleSpec 형
     Eric Snow가 작성하고 구현한 PEP

  명령 줄과 환경 - CPython 명령 줄 세부 사항

  "importlib.import_module()" 함수
